| Sign In | Join Free | My futurenowinc.com |
|
Brand Name : PJ-611D
Stock : 3000
Voltage Rating (Max) : 50V
Model Number : PJ-611D
Operating Temperature : -20℃~+70℃
Delivery Time : 5-6周
Packaging Details : Through Hole
Description : 6.35mm Headphone Jack 1A 50V Through Hole
Connector Type : 6.35mm Headphone Jack
Current Rating : 1A
MOQ : 300
Product Name: 6.35 PHONE JACK (DIP)
Series: 7355
Model: HY-WI-32
Manufacturer: HAOYU (HONG KONG) LIMITED
Date: 2008-07-23
HAOYU
HONG KONG
Z5/Riss
| Item | Test Conditions | Specifications |
|---|---|---|
| 1. RATING | DC50V 1A | |
| 2. OPERATING TEMPERATURE RANGE | PRESERVATIVE TEMPERATURE RANGE | -20C~70C | 15C~35C |
| Item | Test Conditions | Specifications |
|---|---|---|
| 3. ELECTRICAL PERFORMANCE | CONTACT RESISTANCE (Measured by the contact resistance apparatus or meter at 0.1A DC5V. The result is the average of 5 successive measurements.) | 70m max |
| INSULATION RESISTANCE (Between terminals, Between individual terminals and frame) | 100M min | |
| DIELECTRIC STRENGTH (Between terminals, Between individual terminals and frame) | AC 250V 1 MIN. WITHOUT DAMAGE TO PARTS, ARCING OR BREAKDOWN ETC. |
| Item | Test Conditions | Specifications |
|---|---|---|
| 4. MECHANICAL PERFORMANCE | INSERTION AND WITHDRAW FORCE | 3-40N |
| STRENGTH (A static load of 10 N (1000gf) shall be applied to the tip of the terminals for 60 sec. in any direction of actuator.) | WITHOUT DAMAGE OR EXCESSIVE LOOSENESS OF TERMINALS |
| Item | Test Conditions | Specifications |
|---|---|---|
| 5. DURABILITY | Wave-soldering | Within 3 seconds at 260 5C |
| Hand welding | Within 3 seconds at 380C or below | |
| LIFE TEST (An actuator shall be subjected to 5000 cycles at a speed of 30 cycles/min) | CONTACT RESISTANCE 200m; MECHANICAL AND ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED. | |
| HEAT TEST (852C for 48 hours, then keep in normal condition for 30 minutes) | APPEARANCE, MECHANICAL AND ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED. | |
| HUMIDITY TEST (402C 90-96%RH for 48 hours, test after keeping in normal condition for 30 min) | APPEARANCE, MECHANICAL AND ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED. | |
| COLD TEST (At -402C for 48 hrs, after test keep in normal condition for 30 min) | APPEARANCE, MECHANICAL AND ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED. | |
| SALT SPRAY TEST (5% NaCl liquor for 24 hours, after washing, keep in normal condition for 30 min) | WITHOUT EXCESSIVE CORROSION OR CRACK IN APPEARANCE |
|
|
HOOYA PJ-611D Images |