| [3] Ratings |
| Rated Voltage (MAX) | | 50V |
| Rated Current (MAX) | AC/DC (Virtual value) 50Hz | 0.5A |
| Ambient Temperature Range | | -45 to +85 |
| [4] Performance |
| 4.1 Electrical Performance |
| Contact Resistance | Mate applicable FPC/FFC, dry circuit, 20mV MAX, 10mA | 20 m MAX |
| Insulation Resistance | Mate applicable FPC/FFC, 500V DC between adjacent terminals or ground | 500M MIN |
| Dielectric Strength | Mate applicable FPC/FFC, 200V AC (virtual value) for 1 minute between adjacent terminals or ground | No Breakdown |
| 4.2 Mechanical Performance |
| Locking and Withdrawal Force | For 0.3mm thick FFC, speed 253mm/minute | Locking: 1.96*n (N) MAX
Withdrawal: 0.49*n (N) MIN |
| Terminal/Housing Retention Force | Pull terminal outwards at speed of 253mm/minute | 3.92N MIN |
| 4.3 Environmental and Other Performance |
| Repeated Insertion and Withdrawal | 20 cycles at speed < 10 cycles/minute (no power) | Contact Resistance: 60 m MAX |
| Temperature Rise | Carrying rated current load (UL 498) | 30 MAX |
| Vibration | DC 1mA, Amplitude 1.5mm P-P, Frequency 10-55-10Hz/min, 2 hours in each X,Y,Z axes | Discontinuity: 1 ms MAX
Appearance: No Damage |
| Shock | DC 1mA, 490m/s {50G}, 3 strokes in each X,Y,Z axes | Discontinuity: 1 ms MAX
Appearance: No Damage |
| Heat Resistance | 852 for 96 hours, then return to room temp for 1-2 hours | Contact Resistance: 60 m MAX
Appearance: No Damage |
| Cold Resistance | -402 for 96 hours, then return to room temp for 1-2 hours | Contact Resistance: 60 m MAX
Appearance: No Damage |
| Humidity | 402, 90-95% RH for 96 hours, tested within 0.5 hours after returning to room temp | Insulation Resistance: 20 M MIN
Appearance: No Damage |
| Temperature Cycling | 5 cycles: -452 (30 min) -> Room Temp (10-15 min) -> 852 (30 min) -> Room Temp (10-15 min) | Contact Resistance: 60 m MAX
Appearance: No Damage, No Corrosion |
| Salt Spray | 484 hours exposure to 51% salt spray solution at 352, followed by washing and drying | Contact Resistance: 60 m MAX
Appearance: No Damage |
| SO2 Gas Resistance | 24 hours exposure to 505ppm SO2 gas at 402 | Contact Resistance: 60 m MAX
Appearance: No Damage |
| NH3 Gas Resistance | 40 minutes exposure to NH3 gas from 28% Ammonia solution | Contact Resistance: 60 m MAX
Appearance: No Damage |
| Solderability | Immersion in 2355 tin bath for 20.5 sec (0.2mm from terminal tip) | Solder Wetting: 95% |
| Resistance to Soldering Heat | Immersion in 2605 tin bath for 50.5 sec (0.2mm from terminal tip) | Appearance: No Damage, No Deformation |
| Product Models |
| Part Number Suffix | Description | |
| AFC24-S**FIC-00 | Small batch available (tube packaging) | |
| AFC24-S**FIA-00 | Recommended for bulk orders (reel packaging) | |
