| Connector Types | D-subminiature |
| Available Positions | 9, 15, 25, 37, 50 |
| Termination Styles | Printed Circuit Board (Vertical, Right-Angle), Cable Assembly, Wire Harness (Crimp and Poke, Solder Cup, Insulation Displacement (IDC), Wire Wrap) |
| Contact Types | Stamped and formed, Screw machine |
| Contact Size (Standard Density) | Size 20 |
| Durability | 500 mating cycles |
| Current Rating | 5 Amps (Standard), 3 Amps (All-Plastic IDC) |
| Withstanding Voltage | Minimum 1000V RMS (Standard), Minimum 1250V RMS (Series 1, Series 3, M24308) |
| Contact Resistance | 2.7 milliohms maximum |
| Insulation Resistance | 5000 megohms minimum (initial); 1000 megohms (minimum) after environmental testing |
| Operating Temperature | -65C to +105C (Standard), -65C to +125C (Series 1, Series 3, M24308, All-Plastic IDC) |
| Shock Rating | 50G peak per MIL-STD-202, Method 213, Condition G |
| Vibration Rating | 12 cycles in three perpendicular directions @ 10-2000Hz, per MIL-STD-202, Method 204, Condition D |
| Moisture Resistance | 90-95% relative humidity @ 40C for 96 hours per MIL-STD-202, Method 103 |
| MIL-C-24308 Compliance | M24308 Series meets Class G specifications |
| PCB Tail Hole Size | .040" (1.02mm) diameter |
| Wire Gauge (Crimp and Poke) | 20-24 AWG |
| Wire Gauge (Solder Cup) | Accommodates up to 20 AWG wire |
| Wire Gauge (IDC) | 24-28 AWG |
| Panel Mounting Hardware Options | .120" mounting holes, 4-40 clinch nuts, dual float bushings |
| Contact Arrangements | Refer to pages 4-9 for detailed diagrams and dimensions |
| Shell Dimensions | Refer to pages 5-6 for detailed dimensions by shell size and position count |
| PCB Layout Dimensions | Refer to pages 7-9 for detailed footprints and layout dimensions |
